OLYMPUS E-3 韌體 Version 1.1 支援手動鏡頭防手震

OLYMPUS 發表 E-3 新的韌體 Version 1.1，開始支援轉接非 4/3 系統鏡頭防手震功能，透過手動設定鏡頭焦距達到最佳手震補償的效果。

以下實測照片（局部裁切，並縮小至原圖面積約 25%）使用 E-3 Version 1.1 + OLYMPUS Zuiko 200mm/F4，焦距 200mm（400mm equiv.）、光圈 F4.0、ISO 400、快門 1/20 秒，約有 4 級的手震補償效果。點擊下圖檢視大圖。



可設定的焦距：
8mm, 10mm, 12mm, 16mm, 18mm, 21mm, 24mm, 28mm, 30mm, 35mm, 40mm, 48mm, 50mm, 55mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 100mm, 105mm, 120mm, 135mm, 150mm, 180mm, 200mm, 210mm, 250mm, 300mm, 350mm, 400mm, 500mm, 600mm, 800mm, 1000mm

Version 1.1 韌體修正如下：

• Enabled use of the Image Stabilization function with non-Four Thirds System interchangeable lenses by inputting a specific focal length.
• Matched the rotation of the dial on the rear of the Power Battery Holder HLD-4 and the movement direction of the AF target.
• Increased the number of storable still pictures by improving the battery check when the Power Battery Holder HLD-4 is attached.
• Focusing now stops immediately when the AF start button (AEL/AFL or Fn button) is released.
• Corrected the phenomenon where the flash control caused an under exposure while using bounce flash at short distances with the FL-50R or FL-36R Electronic Flash.
• Improved selection and prioritization of the central 5 ranging points when shooting in C-AF mode and Dynamic-single Target mode.

手動鏡頭防手震操作方法：（英文與日文）